UGREEN NASync · UGOS Pro · Protect the next decision
A red storage warning calls for a careful record of the current state. Before Repair, a drive swap or another restart, establish what failed and what is still running.
From the DH2300 and DXP2800 to the DXP4800, DXP6800 Pro and DXP8800 Plus, UGREEN models have different hardware and supported operations. Check the exact label and UGOS Pro version rather than treating the NASync family as one configuration. A good processor, fast network or roomy drive bay cannot tell you whether a particular storage incident is a disk fault, a connection problem, a filesystem issue or a management-service failure.
Technical guidance checked 11 November 2026 · Applies to the documented versions and conditions below.

Start with the current operation
A pool status describes a state observed by UGOS Pro. It does not, by itself, prove that every disk is healthy, that the files have gone, or that a rebuild is appropriate. Capture the exact wording, the pool and volume screens, the disk list and any task already in progress.
If files are still readable and the NAS is responding normally, prioritise an independent copy of irreplaceable files. If reads are stalling or the device is reporting further errors, stop treating it as a routine backup job and get advice about acquisition. Repeated retries can consume the access that remains.
Keep the full original drive set. Record bay numbers and serial numbers before anyone removes a member. Include the role of installed M.2 SSDs—storage, cache or unused—as it is actually configured, rather than assuming every small SSD can be left out.
This helper suggests what to record and discuss. It cannot diagnose the pool or authorise a repair.
Record the exact screens and any active task. Avoid clicking Repair, changing members or repeatedly restarting simply to discover what happens. Ask for advice before choosing a state-changing operation.
Before changing the array
Use the selector to identify what a proposed action would change. Each trap has a different set of details to preserve before anyone attempts repair.
First identify where the message appears. UGREEN’s documented Service Error troubleshooting article concerns local Sync & Backup tasks on a computer. It discusses the client service and its environment. That is not evidence that an internal Btrfs storage pool has merely lost a mount index.
A volume which will not mount needs a different investigation from a desktop sync client which cannot start. There may also be genuine disk, power, connection or filesystem trouble. A recent update is a useful event to record; it is not proof that the update caused the incident.
Do not delete a pool, create a replacement pool or initialise existing members to remove the warning. Creating an array writes metadata. Filesystem repair may also change structures needed to interpret the previous state. Upstream Btrfs documentation expressly warns against casually using its repair mode.
The useful first steps are to preserve screenshots and available logs, identify the affected layer, and confirm copies before a proposed change. There is no universal Sync & Backup disable–enable sequence in this guide: an app-specific workaround is not a general storage-pool recovery method.
A drive-health summary and RAID membership answer different questions. A drive can appear in the disk list while its previous array state is unresolved. Conversely, an offline member does not prove that the mechanism inside that drive has failed. Connections, power and I/O errors also need consideration.
Review the existing health information and error history. Record the exact model, serial number, bay, reported sectors and connection errors; do not reduce the decision to a single green badge. A health check cannot certify that all sectors will be readable through a sustained rebuild.
UGREEN’s compatibility guidance discourages SMR drives. That supports checking exact drive models against the current list. It does not establish a universal UGOS timeout of seven or fifteen seconds, or a fixed stall duration for every SMR drive. Workload, drive behaviour and configuration matter.
Repeatedly removing, reinserting and re-adding a member changes the situation before it is understood. Do not start a series of hot reseats or force an old member back into an array just because it briefly reappears. Follow the model’s documented replacement procedure after the failed member and the next operation have been confirmed.

A rebuild reconstructs redundancy by reading surviving members and writing a replacement. It is a substantial workload, not a copy stored independently of the array. If important files remain readable, verify a separate copy before a planned repair. If the set is unstable, its acquisition plan may need professional assessment first.
UGREEN’s documented Repair Storage Pool procedure applies to a Degraded pool. It is not a blanket remedy for every Danger, Critical or unavailable-volume message. Confirm the actual RAID level too: RAID 0 has no parity or mirror from which to perform a normal redundancy rebuild, and RAID 10 survival depends on which mirror members remain.
The replacement must meet the requirements of the particular operation. UGREEN’s drive-by-drive expansion procedure requires a replacement no smaller than the drive being replaced; its RAID-conversion instructions have their own capacity rules. A matching “12 TB” label alone is not the complete compatibility check. Confirm usable capacity, sector format and model support rather than guessing.
Do not automatically run a long SMART test, surface scan or scrub across suspect surviving drives as an incident response. Those are additional reads; a test cannot make failing media safe. Healthy-system maintenance and recovery of an unstable original set are different jobs. Where a disk is failing, preserving a usable image before repair attempts is the important distinction.
Adding capacity, replacing members with larger drives and converting a RAID level are different operations. They can change how data and parity are laid out. Do not start them on a pool already showing an unresolved fault simply because extra space or another drive seems likely to help.
For the documented versions, UGREEN requires a Normal pool for RAID conversion and drive-by-drive expansion. Its expansion guidance calls the process high risk, asks for a backup first, and specifies one replacement and completed repair at a time. Do not remove the next member while the previous repair is incomplete.
Power-state advice depends on the stage. UGREEN’s replacement workflow specifies powering down before a drive is removed. Its conversion guidance says to keep power on during conversion and not to force a restart after a failed conversion. These instructions concern different points in a workflow; they are not interchangeable.
Use a compatible, configured UPS and verify communication and protection behaviour before a planned change. If a repair or conversion is already running and the pool becomes inaccessible, record its state and ask UGREEN support or the recovery lab how to proceed. Do not improvise a power cut, reboot loop or another conversion.
An interruption can create a difficult recovery problem, but it is inaccurate to say that every power failure destroys all metadata or makes reconstruction impossible. Preserve the original members, replacement disks and the history of the attempted operation. Those details may be essential to understanding the layout.
What the storage screen cannot show
UGOS Pro documents Btrfs and EXT4 volume choices. Linux RAID metadata, volume mappings and filesystem structures can all be relevant to recovery, but the exact layout must be identified from this system and its members. Do not assume every model, firmware and pool has one universal mdadm → LVM → filesystem recipe.
A disk can be detected while a volume remains unavailable. A filesystem can be present while a share or app is not serving it. That is why a single error label cannot tell you which structures to rebuild or repair.
Standard Linux components are useful to an examiner; they do not guarantee that a drive set will mount unchanged on any Linux PC. Filesystem features, the original configuration, encryption and unreadable sectors still matter. Keep the originals available and analyse verified working copies where appropriate.
Disks, identity, connection and readable sectors
Member order, metadata, redundancy and task history
Actual mappings and Btrfs or EXT4 structures
The access you see in the interface
Read the status in context
UGREEN documentation uses Normal, Warning, Danger and Critical in one overview, and translated variants such as Dangerous and Serious elsewhere. Firmware and language can change the wording. Record the exact screen; do not turn these labels into a diagnosis.
| What you see | What it does—and does not—establish | Useful next decision |
|---|---|---|
| Normal | The overview reports a normal state. It does not prove your independent backup contains the wanted files. | Verify the copy and operation prerequisites before a planned change. |
| Degraded pool | Redundancy is reduced according to the actual RAID layout. This is a pool state, not a universal one-drive diagnosis. | Record the missing or affected member, verify copies and confirm Repair eligibility. |
| Warning / Danger / Dangerous | An issue requires investigation. Read pool, volume and individual-drive details rather than inferring a cause from the headline. | Avoid new write-heavy jobs. Record errors and whether files and active tasks remain accessible. |
| Critical / Serious, damaged or unavailable | Use the exact message and context. It does not independently establish that every disk has failed or that files are gone. | Do not initialise or force a restart. If an operation is running, obtain state-specific advice before changing power or members. |
| Service Error in Sync & Backup | UGREEN’s documented computer-client error is not a general diagnosis of NAS storage-pool damage. | Identify the app and device displaying it. Keep client-service troubleshooting separate from pool reconstruction. |
Source scope: UGREEN Storage Overview and Storage Health documentation; Repair, expansion and conversion instructions have separate version and state requirements.
For a healthy NAS before a change
This is a quick review of preparedness—not a surface scan, certification or promise that a rebuild will succeed. Use it while the NAS is healthy, before a planned update, expansion or migration. If the pool is already failing, return to the incident planner instead.
Print a record for the status, bay order, task history and copies you need to discuss. No repair commands or passwords.
When the original set needs assessment
A recovery assessment should distinguish failing media from array, volume and filesystem problems. Where appropriate, the members are imaged and the layout is analysed from working copies, rather than experimenting with the only originals. A damaged drive may require stabilisation before a useful copy can be made.
Bring the complete history: which members were removed or replaced, their original bays, any repair or conversion attempted, and the last point at which files were readable. Keep replaced originals. Tell the lab about cache devices, encryption and existing backups, with credentials exchanged securely rather than in the enquiry.
No lab can infer a guaranteed outcome from “UGREEN crashed” or a green SMART summary. Unreadable areas, changed metadata, overwrites, encryption and the exact configuration affect what can be reconstructed. A mountable pool, a recovered folder and all the wanted files are different outcomes.
Questions before Repair
Yes, drive detection, RAID membership, filesystem access and application service are different layers. A health summary is not proof that the complete set is readable or correctly assembled. Record the detailed states instead of assuming either software corruption or total physical failure.
Confirm the actual RAID layout, the affected member, the documented Repair requirements and the independent copies first. A rebuild is a significant workload. If reads are unstable or further members have errors, get advice about preserving the original set before starting another task.
There is no universal instruction for every storage incident. An active conversion or repair needs different treatment from a planned drive replacement. UGREEN explicitly warns against forced restart during failed conversion. Establish what is running and seek state-specific advice before changing power or members.
No test can certify that outcome. Reviewing existing information is useful; automatically adding a long test or surface scan to suspect originals is a separate workload. For a failing set, discuss acquisition and copying priorities rather than using a stress test as permission to rebuild.
Linux components may be relevant to an examination, but that is not a universal plug-and-mount recipe. The actual member layout, metadata, filesystem features, encryption and readable areas must be understood. Avoid assembly, creation or repair experiments on the only original set.
It can make the incident more complex, but failure of the rebuild alone does not establish the fate of every file. Keep all original and replacement members and the operation history. An assessment must determine what remains readable and how the layout changed.
Primary documentation and scope
UGREEN’s documented workflows provide the starting conditions and operation-specific cautions. Linux and recovery-tool documentation explain why reconstruction, repair and preservation are different tasks. This article is not a diagnosis of your NAS or an endorsement of an unverified workaround.
Checked 11 November 2026. Interface wording and prerequisites can change. The documented firmware scopes below are relevant to those procedures; they do not establish that every model or later release behaves identically.
Product names belong to their respective owners. Conceptual artwork and diagrams are explanatory, not client evidence or a literal partition map.